POE2412G

Overview A compact, reliable solution for delivering both data and power over a single Ethernet cable. This 24V Passive PoE Injector Adapter is engineered for straightforward deployment of PoE-enabled devices where standard 802.3af/at negotiation is unnecessary. Ideal for IP cameras, wireless access points, VoIP phones, and other low-power network devices.

Key Features

• Ports: 1 × Gigabit PoE Port (out), 1 × Gigabit Non‑PoE Port (in)

• Power: 24V DC input

• Maximum PoE Power: 12 W delivered to the powered device

• Cabling: Data and power carried over the same Ethernet cable (passive PoE)

• Housing: Durable plastic case, lightweight and compact

• Throughput: Full Gigabit Ethernet data rates on both ports

• Plug-and-play: No configuration required; power is applied as soon as the adapter is connected

• LED indicator(s): Power and PoE status (model dependent)

Technical Specifications

• Input voltage: 24V DC

• Output PoE voltage: 24V DC (passive)

• Maximum output power: 12 W

• Port types:

  • LAN In: 1 × RJ45 Gigabit Non‑PoE

  • PoE Out: 1 × RJ45 Gigabit PoE

• Data rate: 10/100/1000 Mbps, auto MDI/MDIX

• Power polarity: Center-positive (verify adapter barrel connector and cabling)

• Connector (power): DC barrel jack (specify connector size with purchase)

• Case material: Plastic

• Operating temperature: Typical commercial range (consult datasheet for exact values)

• Dimensions & weight: Compact, lightweight design (refer to product label for exact dimensions)

• Safety & compliance: Designed for indoor use; follow local regulations and installation best practices

Applications

• Surveillance cameras where low-power passive PoE is sufficient

• Outdoor WAPs and bridges when paired with appropriate outdoor housings and cable runs

• Point-of-sale terminals and kiosks requiring a simple power+data solution

• Temporary network deployments and rapid installations

Installation Notes & Safety

• Passive PoE does not include handshake/negotiation; ensure connected device supports 24V passive PoE to prevent damage.

• Confirm polarity and connector compatibility before connecting power.

• Maximum 12 W output limits use to low-power devices—do not connect high-power PoE devices.

• Use quality Cat5e/Cat6 cable to maintain Gigabit performance and minimize voltage drop.

• For extended cable runs, calculate voltage drop and ensure adequate power at the device end.

• Indoor use recommended unless adapter is specified for outdoor environments.

Package Includes

• 24V Passive PoE Injector Adapter (1 × PoE out, 1 × Non‑PoE in)

• Quick start guide

• AC/DC power supply sold separately or included depending on SKU (check product listing)

Ordering Information Specify model/part number when ordering to confirm included power supply, connector type, and compliance certifications.

Zorins Technologies — A Network Leader in Global Industry. Exceptional design, dependable power delivery, and simple deployment

24V Passive PoE Injector Adapter

Overview A compact, reliable solution for delivering both data and power over a single Ethernet cable. This 24V Passive PoE Injector Adapter is engineered for straightforward deployment of PoE-enabled devices where standard 802.3af/at negotiation is unnecessary. Ideal for IP cameras, wireless access points, VoIP phones, and other low-power network devices.

Key Features

• Ports: 1 × Gigabit PoE Port (out), 1 × Gigabit Non‑PoE Port (in)

• Power: 24V DC input

• Maximum PoE Power: 12 W delivered to the powered device

• Cabling: Data and power carried over the same Ethernet cable (passive PoE)

• Housing: Durable plastic case, lightweight and compact

• Throughput: Full Gigabit Ethernet data rates on both ports

• Plug-and-play: No configuration required; power is applied as soon as the adapter is connected

• LED indicator(s): Power and PoE status (model dependent)

Technical Specifications

• Input voltage: 24V DC

• Output PoE voltage: 24V DC (passive)

• Maximum output power: 12 W

• Port types:

  • LAN In: 1 × RJ45 Gigabit Non‑PoE

  • PoE Out: 1 × RJ45 Gigabit PoE

• Data rate: 10/100/1000 Mbps, auto MDI/MDIX

• Power polarity: Center-positive (verify adapter barrel connector and cabling)

• Connector (power): DC barrel jack (specify connector size with purchase)

• Case material: Plastic

• Operating temperature: Typical commercial range (consult datasheet for exact values)

• Dimensions & weight: Compact, lightweight design (refer to product label for exact dimensions)

• Safety & compliance: Designed for indoor use; follow local regulations and installation best practices

Applications

• Surveillance cameras where low-power passive PoE is sufficient

• Outdoor WAPs and bridges when paired with appropriate outdoor housings and cable runs

• Point-of-sale terminals and kiosks requiring a simple power+data solution

• Temporary network deployments and rapid installations

Installation Notes & Safety

• Passive PoE does not include handshake/negotiation; ensure connected device supports 24V passive PoE to prevent damage.

• Confirm polarity and connector compatibility before connecting power.

• Maximum 12 W output limits use to low-power devices—do not connect high-power PoE devices.

• Use quality Cat5e/Cat6 cable to maintain Gigabit performance and minimize voltage drop.

• For extended cable runs, calculate voltage drop and ensure adequate power at the device end.

• Indoor use recommended unless adapter is specified for outdoor environments.

Package Includes

• 24V Passive PoE Injector Adapter (1 × PoE out, 1 × Non‑PoE in)

• Quick start guide

• AC/DC power supply sold separately or included depending on SKU (check product listing)

Ordering Information Specify model/part number when ordering to confirm included power supply, connector type, and compliance certifications.

Zorins Technologies — A Network Leader in Global Industry. Exceptional design, dependable power delivery, and simple deployment for your low‑power PoE needs.