24-Port Gigabit Switch
Overview A compact, high-performance 24-port Gigabit switch engineered for reliable network aggregation in small-to-medium enterprise environments. Housed in a durable 1U 13-inch steel chassis, this switch delivers full-duplex Gigabit connectivity, low-latency forwarding, and easy deployment with plug-and-play simplicity.
Key Features
Ports: 24 × Gigabit RJ45 ports (10/100/1000 Mbps auto-negotiation)
Form Factor: 1U, 13-inch rack-mountable steel case — fits compact racks and network cabinets
Installation: Plug and play — no configuration required; auto MDI/MDIX on all ports
Performance: Wire-speed forwarding with full-duplex support and non-blocking architecture
Reliability: Durable steel construction, passive cooling for silent operation, and enterprise-grade components
Power: Internal AC power supply with standard IEC inlet (specify voltage options per region)
LEDs: Per-port status LEDs for link/activity and speed; system power LED
Management: Unmanaged switch for zero-configuration operation; ideal for edge aggregation and simple expansions
Safety & Compliance: Built to meet relevant safety and EMC standards (consult model-specific datasheet for certifications)
Technical Specifications (Typical)
Switching capacity: 48 Gbps (wire-speed)
Forwarding rate: Up to 35.7 Mpps
MAC address table: 8K entries
Jumbo frames: Up to 9,000 bytes
Buffer memory: 1 MB (shared)
Latency: < 10 µs (64-byte frame, full-duplex)
Power consumption: < 20 W (typical; depends on load)
Operating temperature: 0°C to 40°C
Storage temperature: -40°C to 70°C
Humidity: 10% to 90% non-condensing
Dimensions (W×D×H): 13.0 in × 6.7 in × 1.7 in (approx.)
Weight: ~3.5 lbs (approx.)
Use Cases
Small office / branch office network aggregation
Classroom and lab network deployments
Edge connectivity for PoE-less access points, cameras, and VoIP phones (non-PoE)
Temporary or permanent rack-mounted network expansion
What’s in the Box
24-Port Gigabit Switch (1U 13-inch steel chassis)
Rack-mount ears and mounting hardware
Power cord
24-Port Gigabit Switch
Overview A compact, high-performance 24-port Gigabit switch engineered for reliable network aggregation in small-to-medium enterprise environments. Housed in a durable 1U 13-inch steel chassis, this switch delivers full-duplex Gigabit connectivity, low-latency forwarding, and easy deployment with plug-and-play simplicity.
Key Features
Ports: 24 × Gigabit RJ45 ports (10/100/1000 Mbps auto-negotiation)
Form Factor: 1U, 13-inch rack-mountable steel case — fits compact racks and network cabinets
Installation: Plug and play — no configuration required; auto MDI/MDIX on all ports
Performance: Wire-speed forwarding with full-duplex support and non-blocking architecture
Reliability: Durable steel construction, passive cooling for silent operation, and enterprise-grade components
Power: Internal AC power supply with standard IEC inlet (specify voltage options per region)
LEDs: Per-port status LEDs for link/activity and speed; system power LED
Management: Unmanaged switch for zero-configuration operation; ideal for edge aggregation and simple expansions
Safety & Compliance: Built to meet relevant safety and EMC standards (consult model-specific datasheet for certifications)
Technical Specifications (Typical)
Switching capacity: 48 Gbps (wire-speed)
Forwarding rate: Up to 35.7 Mpps
MAC address table: 8K entries
Jumbo frames: Up to 9,000 bytes
Buffer memory: 1 MB (shared)
Latency: < 10 µs (64-byte frame, full-duplex)
Power consumption: < 20 W (typical; depends on load)
Operating temperature: 0°C to 40°C
Storage temperature: -40°C to 70°C
Humidity: 10% to 90% non-condensing
Dimensions (W×D×H): 13.0 in × 6.7 in × 1.7 in (approx.)
Weight: ~3.5 lbs (approx.)
Use Cases
Small office / branch office network aggregation
Classroom and lab network deployments
Edge connectivity for PoE-less access points, cameras, and VoIP phones (non-PoE)
Temporary or permanent rack-mounted network expansion
What’s in the Box
24-Port Gigabit Switch (1U 13-inch steel chassis)
Rack-mount ears and mounting hardware
Power cord (region-specific)
Quick installation guide and safety instructions
Ordering Notes
Available in regional AC voltage options. Confirm local power requirements.
For Power over Ethernet (PoE) needs or managed features, consult alternate models with PoE/mgmt capability.
Zorins Technologies — Product support and warranty details available upon request.
24-Port Gigabit Switch
Overview A compact, high-performance 24-port Gigabit switch engineered for reliable network aggregation in small-to-medium enterprise environments. Housed in a durable 1U 13-inch steel chassis, this switch delivers full-duplex Gigabit connectivity, low-latency forwarding, and easy deployment with plug-and-play simplicity.
Key Features
Ports: 24 × Gigabit RJ45 ports (10/100/1000 Mbps auto-negotiation)
Form Factor: 1U, 13-inch rack-mountable steel case — fits compact racks and network cabinets
Installation: Plug and play — no configuration required; auto MDI/MDIX on all ports
Performance: Wire-speed forwarding with full-duplex support and non-blocking architecture
Reliability: Durable steel construction, passive cooling for silent operation, and enterprise-grade components
Power: Internal AC power supply with standard IEC inlet (specify voltage options per region)
LEDs: Per-port status LEDs for link/activity and speed; system power LED
Management: Unmanaged switch for zero-configuration operation; ideal for edge aggregation and simple expansions
Safety & Compliance: Built to meet relevant safety and EMC standards (consult model-specific datasheet for certifications)
Technical Specifications (Typical)
Switching capacity: 48 Gbps (wire-speed)
Forwarding rate: Up to 35.7 Mpps
MAC address table: 8K entries
Jumbo frames: Up to 9,000 bytes
Buffer memory: 1 MB (shared)
Latency: < 10 µs (64-byte frame, full-duplex)
Power consumption: < 20 W (typical; depends on load)
Operating temperature: 0°C to 40°C
Storage temperature: -40°C to 70°C
Humidity: 10% to 90% non-condensing
Dimensions (W×D×H): 13.0 in × 6.7 in × 1.7 in (approx.)
Weight: ~3.5 lbs (approx.)
Use Cases
Small office / branch office network aggregation
Classroom and lab network deployments
Edge connectivity for PoE-less access points, cameras, and VoIP phones (non-PoE)
Temporary or permanent rack-mounted network expansion
What’s in the Box
24-Port Gigabit Switch (1U 13-inch steel chassis)
Rack-mount ears and mounting hardware
Power cord
24-Port Gigabit Switch
Overview A compact, high-performance 24-port Gigabit switch engineered for reliable network aggregation in small-to-medium enterprise environments. Housed in a durable 1U 13-inch steel chassis, this switch delivers full-duplex Gigabit connectivity, low-latency forwarding, and easy deployment with plug-and-play simplicity.
Key Features
Ports: 24 × Gigabit RJ45 ports (10/100/1000 Mbps auto-negotiation)
Form Factor: 1U, 13-inch rack-mountable steel case — fits compact racks and network cabinets
Installation: Plug and play — no configuration required; auto MDI/MDIX on all ports
Performance: Wire-speed forwarding with full-duplex support and non-blocking architecture
Reliability: Durable steel construction, passive cooling for silent operation, and enterprise-grade components
Power: Internal AC power supply with standard IEC inlet (specify voltage options per region)
LEDs: Per-port status LEDs for link/activity and speed; system power LED
Management: Unmanaged switch for zero-configuration operation; ideal for edge aggregation and simple expansions
Safety & Compliance: Built to meet relevant safety and EMC standards (consult model-specific datasheet for certifications)
Technical Specifications (Typical)
Switching capacity: 48 Gbps (wire-speed)
Forwarding rate: Up to 35.7 Mpps
MAC address table: 8K entries
Jumbo frames: Up to 9,000 bytes
Buffer memory: 1 MB (shared)
Latency: < 10 µs (64-byte frame, full-duplex)
Power consumption: < 20 W (typical; depends on load)
Operating temperature: 0°C to 40°C
Storage temperature: -40°C to 70°C
Humidity: 10% to 90% non-condensing
Dimensions (W×D×H): 13.0 in × 6.7 in × 1.7 in (approx.)
Weight: ~3.5 lbs (approx.)
Use Cases
Small office / branch office network aggregation
Classroom and lab network deployments
Edge connectivity for PoE-less access points, cameras, and VoIP phones (non-PoE)
Temporary or permanent rack-mounted network expansion
What’s in the Box
24-Port Gigabit Switch (1U 13-inch steel chassis)
Rack-mount ears and mounting hardware
Power cord (region-specific)
Quick installation guide and safety instructions
Ordering Notes
Available in regional AC voltage options. Confirm local power requirements.
For Power over Ethernet (PoE) needs or managed features, consult alternate models with PoE/mgmt capability.
Zorins Technologies — Product support and warranty details available upon request.
